The Ergosphere
Saturday, April 10, 2010
 

Kitson-Still: still obsolete

One of the favorite hobby-horses of a regular GCC commenter is the Kitson-Still locomotive (here's the Wikipedia page).  Built by Kitson and Company in 1926, it used the Still double-acting steam/diesel engine.  One major advantage was the ability of the steam section to apply full torque at zero speed; this allowed the designers to avoid a multi-speed gearbox and clutch, which made the system simpler, cheaper and more rugged.

In normal use, steam was applied to start the locomotive and bring it to a speed of 5 MPH (30 engine RPM).  At 30 RPM steam was turned off and the diesel injection system was activated, which brought the much greater thermal efficiency of the diesel engine to bear.  Exhaust from the diesel engine ran through fire tubes in the boiler, maintaining a head of steam for auxiliary loads and heating of the train in cold weather.  Steam could be applied together with diesel operation for maximum performance.

Despite its mechanical and thermodynamic merits, the Kitson-Still locomotive was not a commercial success.  Some of this may have been due to the design compromises required by the dual-cycle engine (the diesel would probably have operated better at 500-600 RPM instead of the 30-360 RPM set by the single gear ratio), but it doesn't appear to me that this was a major factor.  Kitson and Company went bust in 1934, and the Kitson-Still locomotive was scrapped by the company's receivers.

It is worth taking a look at the problems the Kitson-Still aimed to solve, and why they did not make it successful even at the time:

  1. The thermal efficiency of the diesel system was balanced by the cheapness of coal in pure steam locomotives.
  2. Starting a locomotive under diesel power became easier as transmissions improved.
  3. Eliminating the steam cycle gave operational advantages; it removed the requirement to warm up the boiler and pre-heat the cylinders before starting.
  4. The advent of diesel-electric locomotives also eliminated clutches and multi-speed gearboxes, but did not add the mechanical and operational complexity of an additional steam cycle.  Diesel-electrics are now almost universal.

Adding a bottoming cycle (e.g. exhaust-heat recovery making steam for a combined-cycle system) is a proven way to increase thermal efficiency, but it runs into diminishing returns.  If the bottoming cycle forces design compromises in the engine itself, most of the advantages can be lost while adding difficulties in manufacture, operations and maintenance.  The steam cycles in combined-cycle powerplants restrict the control and lose some gas-turbine efficiency due to increased back pressure, but overall they are well-suited to base-load operation.  Organic Rankine turbines for marine diesels don't alter the main engine and appear to be suitable for automated control; further, the working fluids aren't susceptible to freezing.  Thermoelectric mufflers will need attention to air flow and heat shielding, but the engine won't notice them.  The compromises forced on the Kitson-Still were much larger, and remain roughly the same while the rest of the world has moved on.  It's the past, not the future.

Postscript Monday 4/12:  Somehow, 2 days after I wrote it, this post is now the SIXTH in Google's list of results for "kitson still engine".  I'm not quite sure what to think about this; either it means that posts on the subject are few and far between (the "small pond" effect), or Pagerank's results can be very capricious.

Labels: , , ,

 
Talk largely about energy and work, but also politics and other random thoughts


Mail Engineer-Poet

(If you're mailing a question, is it already in the FAQ?)

Important links

The FAQ
Glossary
The Reference Library

Blogchild of

Armed and Dangerous

Blogparent of

R-Squared




The best prospect for our energy future:
Flibe Energy

ARCHIVES
January 1990 / February 2004 / March 2004 / June 2004 / July 2004 / August 2004 / September 2004 / October 2004 / November 2004 / December 2004 / January 2005 / February 2005 / March 2005 / April 2005 / May 2005 / June 2005 / July 2005 / August 2005 / September 2005 / October 2005 / November 2005 / December 2005 / January 2006 / February 2006 / March 2006 / April 2006 / May 2006 / June 2006 / July 2006 / August 2006 / September 2006 / October 2006 / November 2006 / December 2006 / January 2007 / February 2007 / March 2007 / April 2007 / December 2007 / January 2008 / May 2008 / June 2008 / August 2008 / October 2008 / November 2008 / December 2008 / February 2009 / March 2009 / April 2009 / May 2009 / June 2009 / July 2009 / August 2009 / September 2009 / October 2009 / November 2009 / December 2009 / January 2010 / April 2010 / May 2010 / June 2010 / July 2010 / August 2010 / September 2010 / October 2010 / November 2010 / December 2010 / January 2011 / February 2011 / March 2011 / April 2011 / May 2011 / July 2011 / August 2011 / September 2011 / October 2011 / April 2013 / November 2013 / December 2013 / January 2014 / February 2014 / March 2014 / April 2014 / July 2014 / August 2014 / September 2014 / October 2014 / November 2014 / February 2015 / April 2015 / October 2015 / March 2016 / April 2016 / May 2016 / June 2016 / July 2016 / November 2016 / December 2016 / February 2017 / May 2017 / June 2017 / September 2017 / October 2017 / November 2017 / March 2018 / May 2018 / June 2018 / October 2018 / December 2018 / January 2019 / March 2019 / June 2019 / October 2019 / November 2019 / March 2020 / June 2020 / December 2020 / March 2021 / April 2021 / May 2021 / July 2021 / January 2022 / February 2022 /


Powered by Blogger

RSS feed

Visits since 2006/05/11: